Link:INB Home|INB English| INB русский язык|INB العربية|INB Türkiye|INB فارسی|INB Español|INB Français|INB Português|INB Deutsch|INB 國語|INB 中文|INB 日本语|INB 한국어|INB ภาษาไทย|INB tiếng Việt||Tutorials Maya PSYCHO MOMby Patrasciuc Cristian - PART 1
INB Português Fórum
BEM - vindo a indústria nativa e "boffin") Da era industrial, aqui está cheio de espírito de Luta, Ambos através Da rede espaço biológico nativo espírito "boffin" VEIO a mad labs.Casa inbforum.com, Nome Definitivo: inb-english.forumotion.com
INB Português Fórum

BEM - vindo a indústria nativa e boffin) Da era industrial, aqui está cheio de espírito de Luta, Ambos através Da rede espaço biológico nativo espírito boffin VEIO a mad labs.Casa inbforum.com, Nome Definitivo: inb-english.forumotion.com


Você não está conectado. Conecte-se ou registre-se

《《《《《《《上一页INBforum   Ir em baixo

上一页INBforum》》》》》》》Ver o tópico anterior Ver o tópico seguinte Ir em baixo  Mensagem [Página 1 de 1]

1 Tutorials Maya PSYCHO MOMby Patrasciuc Cristian - PART 1 em Sex Jan 21, 2011 8:41 pm

Admin

avatar
Admin
Introduction - The Concept


After making a few "clean" projects, like cars or beautiful living-rooms, I've decided to make a scene where I can test my texturing ability and, maybe, improve it. So I chose to make a dirty scene. As there are a lot of scenes with dirty walls or corners, I've also looked after something that is not so common, something that it can't be seen everywhere and also something that will shock 'the audience'.So I came up with this idea: a bathroom as a murder place. I'm not good at modeling human bodies, so I thought that it will be a good idea to make only the blood that came up with the murder and leave the rest of the murder story in mystery, so that every viewer can imagine it in his own way.
Modeling


All the objects from the scene are simple ones. They were obtained by just editing standard primitives, using the poly-modeling method.

First, I've grouped my scene into three parts: the toilet, the sink and the tub. I modeled the objects for each part separately in a file. Then, I made the room: the wall, the floor (simple planes) and the window (just boxes and planes that I've retouched a little bit). When the room was ready I've merged the other three parts and scale them to fit the proportions.
To do this better I've created some boxes (the green ones in the image) with the real dimensions of the objects (for the toilet approx. 40x70x50, the sink 60x60x20, the tub 70x160x50) and scaled them until they fitted perfectly into the corresponding box.

Now, I'll show you a few stages during the modeling process. First of all, the sink. I made a box, I converted it to an editable poly and I gave it the basic shape of the sink (using just the cut and extrude basic tools). Then, I added the details, most of all made from standard primitives with a small retouch, like smoothing or a bit of blending. When it's necessary I add a MeshSmooth modifier to smooth things up and give realism to the objects. The same process was used to create the tub so I won't put any details as the objects are similar and I don't want to bore you.

For the toilet I'll detail a bit the process so you can understand it. If you are an advanced 3d artist you can skip this part, as it was made for the beginners. First of all, create a cylinder with 7 segments on height and 8 sides.

Move the vertices so they fit a basic toilet shape, delete the top face and add a Symmetry modifier, so you don't have to bother with both halves of the objects.

Now select the top most edge loop and scale it in order to create a new one inside the cylinder. If it's necessary adjust the position of the new vertices.

With the new created edge loop selected hold Shift and drag it downwards to create the inner part of the toilet.

Select the faces marked with red in the image and extrude them using the 'Local Normal' method. Repeat the process for the bottom of the toilet.

Now you should have something like this.

As we will apply a MeshSmooth modifier we want some edges to remain a bit 'hard'. So, select the edge loops marked with red in the following image and chamfer them using a low value (I used 0.1, but it depends on the scale of your scene and the units that you're using).
1 | 2

3DM3.com
Copyright � Patrasciuc Cristian
Edit by Stryker
Source: [Você precisa estar registrado e conectado para ver este link.]]

Ver perfil do usuário http://pt.inbforum.com

上一页INBforum   Ir em baixo

上一页INBforumVer o tópico anterior Ver o tópico seguinte Voltar ao Topo  Mensagem [Página 1 de 1]

Permissão deste fórum:
Você não pode responder aos tópicos neste fórum

Copyright ©2009-2010 LTD Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

IT:SINGLESERVGoogle谷歌翻译TranslateFORUMSOFTLAYERGoogle谷歌广告联盟AdSenseAsia

 

Criar fórum | © PunBB | Fórum grátis de ajuda | Fale conosco | Assinalar uma queixa | Fórum grátis